Riding Your Schwinn

Helmet Sizing Guide

Caring For Your Helmet

  • Clean shell, pads, and retention system with mild soap, water and non-abrasive cloth.
  • Do not use chemical and cleaning solvents a they can cause unseen damage and reduce the helmet's ability to protect.
  • Keep your helmet away from extreme temperatures as this can cause unseen damage to your helmet.
  • Handle your helmet with care when not in use.
  • Store your helmet in a cool dry place, out of direct sunlight.
  • Evaluate your helmet after three years of use.

Frequently Asked Questions

When should I wear my helmet?

Helmets should be worn whenever you are riding your bike even during a brief or leisure ride.

Where should I purchase my helmet?

You can purchase a helmet at any big box, sporting goods store or independent bike shop that sells CPSC certified helmets.

How long does a helmet last?

The life of a helmet will depend on how well it is maintained. You should inspect your helmet periodically for any cracks or damage that would cause your helmet to malfunction. If you are unsure of your helmet's condition, you can contact the helmet's manufacturer regarding your concerns. Under normal conditions a helmet's average life span is three years. However, if a helmet receives an impact, it should be replaced.

At what age should my child start wearing a helmet?

A helmet is nor for use by anyone who cannot comfortably support the helmet's weight. Children under the age of one should be evaluated by a pediatrician to verify adequate neck musculature before using a helmet.

How many impacts is my helmet designed to withstand?

Helmets are not designed for multiple impacts. An impact can cause unseen damage to the helmet. After an impact, the helmet should be replaced.

At what age should my child start wearing an adult size helmet?

There is no particular age at which a child should switch to an adult helmet. The size helmet you purchase will depend on how well the helmet fits. Remember you always want to achieve a snug fit as noted in the fitting instructions.

Key Facts

  • There are 85 million bicycle riders in the US.
  • 540,000 bicyclists visit emergency rooms with injuries every year.
  • 1 in 8 of the cyclists with reported injuries has a brain injury.
  • Two-thirds of the deaths are from traumatic brain injury.

- Statistics from The Bicycle Helmet Safety Institute

Each year more than 300,000 children aged 14 and under are treated in emergency rooms for bicycle-related injuries.
  • Estimated annual cost of bicycle related injures and deaths (for all ages) is $8 billion.
  • Universal bicycle helmet use by children aged 4 to 15 would prevent 39,000 to 45,000 head injuries and 18,000 to 55,000 scalp and face injuries annually.

- Statistics from The National Highway Traffic Safety Administration

How to Choose a Helmet

When looking to buy a helmet, first look for a "CPSC" sticker. This is an indication that the helmet has passed all required testing standards in the U.S.A. and assures you of the helmet's safety. It is suggested you buy a brand and size that fits well prior to making any adjustments. Once you find the helmet that fits well, you can make adjustments to the helmet to establish a snug fit. A comfortable and snug fit is paramount in choosing a helmet. It is not recommended that you purchase a helmet that you or your child can 'grow into.' A helmet that is loose will not provide the required protection, as it will not remain in place when impacted. This is the reason that we highly recommend you purchase a helmet that fits at the time of purchase

How to Fit a Helmet

The Fit

It is important that your helmet fit comfortably and snugly on your head. The helmet should sit level on your head, and the fit should be firm enough to keep the helmet from moving due to either vibration or impact.

Methods of Fitting the Helmet

Fitting the Foam Pads: Your helmet comes with pads installed at purchase. Some helmets also have extra pads to adjust the fit of the helmet. If your helmet has extra pads and the factoryinstalled pads do not provide a snug comfortable fit, remove the pads from the Velcro™ inside the helmet and insert a different size pad or pads. Feel free to mix and match thicknesses so that the pads conform to your head's shape.

Adjusting a Rear-Fit System: Your helmet may also have a rear fit system which holds the helmet against the lower rear of your head. These systems have an adjustment mechanism. The two most popular mechanisms are a pinch-fit and a dial tensioner. The rear-fit should be adjusted so that it fits snugly against the back of your head.

Fitting the Fit-Ring: Many helmets come with a fit-ring which encircles the head. The fit-ring has an adjustment mechanism typically found at the rear of the ring. The ring should be tightened to a point that the fit is snug, yet comfortable.

Adjusting the Straps

With the helmet level on your head, fasten all straps securely so the straps provide equal tension. The Bicycle Coalition of Maine developed an 'Eye-Ear-Mouth Test' to check the adjustment of the straps. First look up, the front edge of the helmet should be barely visible. Second, the side straps should meet in a 'Y' just below your ear. Third, the chin straps should be snug under your chin, so that when you open our mouth wide, you can feel the helmet pull down a bit. If the straps do not meet these three criteria, adjust the straps beginning at the rear. First adjust the straps through the rear fit system or rearfit piece. Next adjust the 'Y' under your ear. You may need to loosen the side glides and lengthen either the front or rear strap. Be sure to retighten the side glides, when a good fit is achieved. Finally adjust the buckle under your chin. Recheck the fit with the 'Eye-Ear-Mouth Test.'

The Right Fit

The helmet should be worn level on the head with the front approximately one inch or on finger's width above your eyebrow. The retention straps and helmet should fit as snug as possible. Check the fit of your helmet:

  • Look in a mirror and gently rotate the helmet on your head, front to back and side to side, noticing the skin in the brow area. The fit should be comfortable, and the skin should move with the helmet.
  • Try to roll the helmet backwards and forwards. Put your palm under the front edge of the helmet. Push up and back. If the helmet moves more than an inch, tighten the strap in front of your ear. Pull up on the rear edge of your helmet. If the helmet moves more than an inch, tighten the strap behind your ear.

Correct Helmet Position

You may need to work with your helmet's fit for several minutes to achieve a proper fit. If a proper fit cannot be achieved, do not wear the helmet. Each helmet has a slightly different shape and fit. Find the one that fits you best. All adjustments should be checked each time the helmet is worn, making sure the fit is snug at all times.