Spring Tune Up!

It’s starting to get nice out and you are ready to take the bike out for a spin, but you aren’t sure if it is good to go. Sound familiar?

It is important to make sure that your bike is in good working order each and every time you ride, but it is especially important to check your bike at the start of the season. Parts of your bike may have become loose or deflated during winter storage and may need to be fixed either by you or a professional.

This article will highlight some tips for seasonal and continuous bike maintenance.30

Professional Tune Up:

At the start of each season, we recommend that you take your bike to a local dealer for a complete bike tune up. This way you can be sure that your bike will continue to perform at its best ability and last for a long time. Cables naturally stretch over time causing less than ideal braking and shifting, but your bike shop will be able to examine your bike and make sure that everything is functioning properly.

Tune Up at Home:

If you are confident in your abilities and prefer to tune up your bike at home there are three key areas to remember to look at before you take your bike out for the first seasonal ride.

  1. Shifting Cables – be sure that all your gears are shifting correctly and that there is no rubbing. If there is, simply tighten and loosen the strain as needed and readjust the derailleur to eliminate any rubbing.
  2. Brakes – Cables connecting brake pads to the handlebars can go slack over time. Be sure that the cables are properly tightened and that the pads still in working order.
  3. Tires – Your tires will most assuredly be flat by the time spring rolls around. Make sure to inflate them to the correct PSI and check for any possible leaks that may have occurred during storage.
  4. Quick Releases – Be sure that your quick releases on your bike tires are at the correct tension. You do not want a quick release that is too tight or loose.

Yearly Maintenance at Home:

There are also many things you can do at home throughout the year to make sure that your bike is in tip top shape!

1. Clean Your Bike

A clean bike really is a happy bike. When your bike is clean or dirt and other debris it shifts smoother and brakes better.

To clean your bike all you have to do is grab a bucket and fill it with soapy water. You can use bike specific cleaning products that you can find at your bike shop or simply grab some mild dish detergent that you have at home. Then take a rag or a sponge and go over the bike completely, especially areas that might need a little more attention. When you have finished just rinse it off with the hose, but be sure to avoid spraying the hose directly at the hubs or the crank area or any other areas that have some moving parts to them.

Once your bike is clean, you are going to want to lube your chain. The soap and water you just used might have removed some of what you had on your chain previously.

2. Lube the Chain

You can find chain lube at your local bike shop. You want to use proper lubes. Be sure to stick with ones that are made specifically for the bike. Avoid using WD-40 or any motor oils. Chain lube is oil designed specifically for your bike chain and it’s important to keep your chain lubed for a number of reasons.

First, it is going to help you better transfer your power to the road. You will be shifting smoother and because the chains are made of steel and can rust, a layer of lubrication will help prevent that rusting.

A well lubed chain is also a quiet chain, so if you want to avoid those annoying little squeaks; make sure to keep your chain lubed properly.

To lube the chain drip the lube on the inside of the chain while pedaling backwards. Make sure you get the entire chain. Let it sit for a few minutes and then take a rag to the chain and wipe off any excess while pedaling backwards again31

3. Keep Tires inflated to the correct PSI

It is also important to always have your tires inflated to the proper pressure. This makes for a much safer, comfortable, and enjoyable ride. If your tire is under inflated, you will have increased rolling resistance, be more prone to flats and the tire can come off the rim. On the other hand, if it’s over inflated, you will experience excessive road vibration.

Different tires have different inflation pressures. You can find yours listed on the tire’s sidewall.

4. Brakes

You will also want to check your brakes regularly. Ideally, both the front and rear brakes will feel firm to the touch and have even tension between them. Also, make sure that the brake pads are touching the rim and not the tire.

Your brake pads will need to be replaced from time to time, so keep an eye on them for excessive wear.

There you have it! It sounds like a lot, but it’s really necessary for you to have a safe and enjoyable ride each and every time you get on the bike and remember if there’s anything you can’t handle throughout the season, you can always visit your local bike dealer. They will make sure to fix your bike and have you going again in no time!

Let's Ride!

Samantha C.

All photos in this article are by Brand Ambassador Erika Frances.